call: +86-757-82705605 email:[email protected]
News
Home / News /

What Are The Reasons For Solar Street Light In Hindi Not Working Properly?

0

Published by Mars July 02,2020

     If you have installed a solar street light in hindi and used it for a period of time, you suddenly find that the solar street light in hindi is not working. At this time, first check the response of the controller's indicator lights. If neither of the two indicators is on, the solar street light in hindi controller may be damaged. If this happens, the solar street light in hindi system may be impacted by a strong current, such as a direct lightning strike or a short circuit. and so on.

 

solar light 50w

    If it is found at night that the indicator light of the best solar led street light controller shows normal discharge and there is sufficient voltage when checking the battery, but the street light fixture does not light up, we recommend that you directly connect the positive and negative poles of the best solar led street light to the battery In this test, it is found that the discharge cannot be performed, so the driving of the best solar led street light or the rectifier is very likely to be damaged. It is recommended to use a professional multimeter to test again.

  

    The best solar led street light controller displays an under voltage state, and it does not turn on after dark, but the battery voltage has exceeded the under voltage value, indicating that the battery has power. In a 24V system, the undervoltage protection value is about 22.2V (the default value of the controller). After the battery drops to this voltage point, the controller turns off the power and stops discharging, mainly to protect the battery from being over-discharged and affecting the subsequent use of the entire device. 

 

solar light 50w

         The solar light 50w battery panel will charge the battery during the daytime. The charging voltage will only continue to discharge when it is charged to 24V (the controller's default value). The main purpose of this setting is to prevent the battery from being damaged by frequent deep discharge. . In the case of under voltage of the battery, if the solar light 50w controller is not restarted, the voltage between 22.2 volts and 24 volts is under voltage. Only when the voltage of the solar light 50w battery is charged above 24 volts, it will continue to discharge.

< >
Latest posts