How to do installation for best solar light lamp road?

        1.Fully understand the characteristics of best solar light lamp road,light sources and light poles. In accordance with the actual and reference lighting standards of the roads,combined with the investment budget,rationally select best solar light lamp road, light sources and light poles to fully utilize the energy efficiency of the light source. The advantages of light distribution and accessory combination.

          2. Under the condition of ensuring the illumination performance, appropriately increase the spacing of the best solar light lamp road to save the number of lamps,appropriately increase the height of the best solar light lamp road poles to improve the lighting effect,separate the cloth rods in the middle of the road to save engineering cost.

         3. In combination with road engineering, timely intervention in pole position selection, foundation construction and pre-burial in order to timely identify problems, make reasonable changes, ensure quality, and save investment.

         4. According to the actual and geological conditions of the best solar light lamp road project site, design and manufacture the best solar light lamp road pole foundation and the high pole lamp foundation to ensure the foundation is firm and reliable. In particular, it is necessary to pay attention to the matching of the pre-embedded bolts and the reserved holes of the rod seat, the positioning is accurate, the pre-buried length and the external length are reasonable, and the threaded part should be properly protected to facilitate the positioning of the lifting.

         5. In the rock strata and weathered rock sections, scattered grounding and segmental grounding are difficult to meet the requirements. It is conceivable to connect the conductors such as galvanized flat steel according to the design requirements, the connection should be reliable, and at the same time be properly protected and pre-buried. The base is reliably connected to ensure reliable connection of each pole to the ground. In the best solar light lamp road, the pole height is more dispersed, mainly relying on the foundation grounding. If necessary, use a resistance reducing agent to reduce the grounding resistance.

           6. Lifting operations must strictly abide by the operating procedures.Special attention should be paid to the power grid lines and other lines around the hoisting equipment, as well as the surrounding structures. The lifting points should be reasonable when hoisting, and should be adjusted in time after positioning.

          7. Pay attention to the beauty of the best solar light lamp road pole after installation. Starting from the foundation construction, the lamp position is controlled linearly according to the main line, and the line shape is changed according to the road design reasonably.The lamp post is straight, the processing weld and the inspection port should avoid the main line direction, and the whole line is consistent. The inclination of the pole cantilever is to maintain the coordination of direction and angle.    8. The internal fittings of best solar light lamp road fixtures should be inserted tightly and firmly inserted to avoid failure caused by loose wind and poor contact.Best solar light lamp road fixtures are reliably fixed with poles, poles and cantilevers. In the best solar light lamp road, the high pole lamp should be set in place. The lifting frame and the lamp should be fixed reliably.The lifting system should be safe and reliable, and the lifting, limiting and positioning functions should be complete.