What is the cause of the malfunction of stand alone solar lights?

        The components of stand alone solar lights mainly include solar panels, batteries, and light sources. In addition, stand alone solar lights are outdoors, so various problems are prone to occur. The following will detail the four major places where stand alone solar lights are prone to problems.  

          Firstly, the stand alone solar lights flashes and the brightness is unstable. For this reason, the lamp is replaced first. If the lamp is replaced or flashed, the problem of the lamp can be eliminated. At this time, the line is checked, most likely the line poor contact in the interface.

         Secondly, solar street light with panel can only last for one or two days in rainy days. There are two main reasons for this. Dissatisfaction with solar battery charging, solar battery charging is the reason for solar charging, first observe how the recent weather conditions, whether it can guarantee daily charging for 5-7 hours, if the charging is only 2 - 3 hours, this is normal. In addition, check whether the battery is aging. The battery life under normal working conditions is 5-6 years.

           Thirdly, the solar street light with panel stops working. When the solar street light with panel stops working, first check whether the controller is broken. The big reason for this is that the solar street light with panel controller is broken and repaired in time. 

         The above is the three reasons why integrated led solar street light are prone to problems; however, in the end, it is still a quality problem; after a good quality integrated led solar street light, there will be basically no problem after a reasonable installation; this I have a deep understanding of what I did before. Batch road lights are because of poor quality, often large and small problems. Therefore, everyone to buy integrated led solar street light, must be purchased from the regular integrated led solar street light manufacturers, must not be greedy.