What are the requirements for anti-corrosion and installation of wholesale solar led street light poles?

  Because the working environment of wholesale solar led street light is outdoors, wind and rain, the material of wholesale solar led street light is preferably waterproof and corrosion resistant. The wholesale solar led street light pole anti-corrosion is treated by surface hot-dip galvanizing and the anti-corrosion quality is in compliance with the regulations. The average thickness of the hot-dip galvanized layer is not less than 85μm, and the wholesale solar led street light pole spray should be made of high-quality outdoor pure polyester plastic powder. The average thickness is ≥100μm, the sprayed layer is uniform, complete and the surface is smooth, and its adhesion meets the requirements of relevant standards.

  The inspection door below the outdoor solar lights with remote panel pole is parallel to the axis of the pole, 400mm away from the ground, 320mm×120mm access door, the grounding terminal in the door; the edge of the door and the door cover is smooth and flat, and the door and door are assembled and The door gap is no more than 2mm, the door cover is interchangeable, and has effective and reliable anti-theft measures.

  Outdoor solar lights with remote panel are everywhere in the cities we live in. They are an indispensable part of our lives. Whether a outdoor solar lights with remote panel system can operate normally is very important for configuration and installation. After the construction of the general outdoor solar lights with remote panel is completed, the last step is to install the solar led street light kit controller. The recommended wiring sequence is to connect the solar led street light kit first and then connect the battery. After the battery is connected, if the connection is correct, the solar led street light kit controller indicator will light to indicate that the controller is working properly.