Matters Needing Attention In Best Outdoor Solar Street Lights Installation

      With the advancement of technology development in recent years, the popularization and use of green energy, more and more municipal roads in rural areas, the main pole roads are also installed with best outdoor solar street lights.To avoid the failure of best outdoor solar street lights controller operation, you should pay attention to which of the controller when installing best outdoor solar street lights, and it must be in order.

   1. Before installing the best outdoor solar street lights controller, please unpack the box to check whether there is a factory certificate, product manual, quality assurance card, check the circuit according to the drawing, install the model of the specification, and check whether the appearance is damaged.

   2. The controllers of street lights solar power lighting devices are installed outdoor together with the lamps. Due to various external weather changes, street lights solar power may leak or short circuit, resulting in temporary or permanent failure. Therefore, the controller must have a sealing, moisture-proof function, and the protection should reach the level of IP65.

   3. The connecting wires between the controller and the solar panel and the battery should fully consider the factors of low voltage and large current. The cross-sectional area of the wire must meet the requirements of safety, unobstructed current, and it must be firm when the terminal is pressed, and it must have a loosening prevention device.

   4. The street lights solar power controller cannot be directly placed on the battery, which will adversely affect the electronic components of the controller. Although measures such as maintenance-free batteries are often used, the battery will inevitably produce corrosive gases that will have a certain effect on street lights solar power. It may causes the controller to fail.

  5. The insulation resistance between the main circuit of the solar panel and the controller protection device and the shell should not be less than 1 Megohm, and it should be able to withstand AC100V / min power frequency AC withstand voltage. No flashover, breakdown, damage phenomenon.

   6. Pay attention to the wiring sequence: there are many types of lithium ion solar street light, and the wiring sequence of the controller will be a little different. Please strictly follow the controller instructions to make the wiring in order to control the lithium ion solar street light.